Menu
A Power Amplifier is an essential component when it comes to driving any loudspeaker system. However, different speaker systems have varying requirements, and thus, the amplifier needs to be powerful enough to cater to these specifications. A Heavy Duty Power Supply is highly recommended since it not only enhances the amplifier’s performance but also ensures that it can handle even the most difficult and demanding loudspeaker systems with ease. Moreover, a high damping factor is achieved by combining the amplifier’s driver stage with a low impedance power supply, leading to high-quality output signals that are pleasing to the ear.
In recognition of this, Audio Products offers a range of power supply options, each with a specific application in mind, so that whatever your power requirements are, there is an ideal option available for you.
PSP04 offers the best performance for supplying power to chip based amplifiers and has a secondary low voltage output for powering pre-amplifier circuits.
specifications:
Full wave rectifier with dual voltage rail up to 50V 14A per rail.
Additional ±15V 0.5A output.
High ripple current, Low impedance.
4 x TO220 fast rectifier diodes on individual heatsinks.
Faston PCB connectors for easy and rigid connecting of cables.
Dimensions PCB 145mm W x 122mm D
Module ±50V and ±15V per rail.
10 x 4.700uF (23.500uF per voltage rail)
Up to 14A continue power output.
Ripple current 14A.
Max transformer voltage 2 x 33VAC (dual winding or center tap).
PSP02 offers plenty of power to drive monoblock amplifiers.
specifications:
High ripple current, Low impedance.
Full wave rectifier with dual voltage rail up to 100V 14A per rail.
4 x TO220 fast rectifier diodes on individual heatsinks.
Faston PCB connectors for easy and rigid connecting of cables.
Dimensions PCB 145mm W x 122mm D
2 versions are available;
Module 63V per rail.
8 x 10.000uF (40.000μF per voltage rail)
Up to 14A continue power output.
Ripple current 19A.
Max transformer voltage 2 x 42VAC (dual winding or center tap).
Module 100V per rail.
8 x 4.700uF (23.500μF per voltage rail)
Up to 14A continue power output.
Ripple current 17.6A.
Max transformer voltage 2 x 65VAC (dual winding or center tap).
PSP01 drives a dual channel power amplifier with ease or can be used for building a heavy duty monoblock amplifier.
specifications:
High ripple current, Low impedance.
Full wave rectifier with dual voltage rail up to 100V 14A per rail.
4 x TO220 fast rectifier diodes on individual heatsinks.
Faston PCB connectors for easy and rigid connecting of cables.
Dimensions PCB 145mm W x 122mm D
2 versions are available;
Module 63V per rail.
12 x 10.000uF (60.000μF per voltage rail)
Up to 14A continue power output.
Ripple current 28.5A.
Max transformer voltage 2 x 42VAC (dual winding or center tap).
Module 100V per rail.
12 x 4.700uF (23.500μF per voltage rail)
Up to 26.4A continue power output.
Ripple current 17A.
Max transformer voltage 2 x 65VAC (dual winding or center tap).
All modules are equipped with Samwha HE series 105ºC high ripple current power capacitors from South Korea.
